Welcome to visit:GuangDong Multifit Solar Co,.Ltd
Your position:HOME >> Enterprise dynamics  >> good news!Jialong Paper 200KW project was successfully completed
 [返回列表]
good news!Jialong Paper 200KW project was successfully completed
发布时间:2022-4-25   文章来源:   
On March 12, 2022, the "Jialong Paper 200KW" solar energy project undertaken by our company was successfully connected to the electricity grid, marking the official completion of the project, which took 90 days.

Multifit company undertook the 200-kilowatt photovoltaic system construction project of Jialong Paper in November 2021. This project uses the idle roof space of the enterprise for green power generation. All related facilities and equipment are designed by the professional team of Multifit. Manufactured to ensure efficient power generation rate while taking into account the stability of the output voltage. The project was planned by the planners according to the customer's needs and the characteristics of the space area. It took 90 days from design to construction, completion, commissioning and use. It is initially estimated that the annual power generation is about 300,000 kWh, the annual carbon dioxide emission reduction is about 30 tons, and the annual income is about 185,000 yuan.

In this project, comprehensive factors such as the load of the entire photovoltaic system, the wind resistance capacity and the power generation efficiency of the system are fully considered in the system design. After complicated design, demonstration, modification and adjustment, we finally determined to install more than one thousand square meters of solar cell modules. The whole photovoltaic system uses about two thousand 100Wp amorphous thin film solar cell modules, and more than ten solar cells. PV inverter with a total installed capacity of about 80kwp. The entire photovoltaic system is divided into 11 subsystems, each subsystem is equipped with a grid-connected inverter, and a data acquisition and monitoring system completes the data acquisition and monitoring of the entire photovoltaic system.


The bracket of the entire photovoltaic system is made of hot-dip galvanized steel material, with a wind resistance of 150kMPH. In addition to the hot-dip galvanized layer, the steel used is also sprayed with anti-rust primer and anti-salt spray topcoat, which is the best material on the market.

In the lightning protection design, the lightning protection forms a reliable and stable connection with the solar steel structure.   


In the current process of economic and social development in our country, solar power generation systems have been widely used by people. In order to improve the operation quality of solar power generation systems, we must make strict requirements on the installation process so that the power generation rate of solar power generation systems can reach maximize. During the whole installation process, we have strict requirements on the installers, and then through the relevant skill training methods to enhance the professional ability of the technicians, to ensure that the entire solar power generation system will be smooth and efficient in the future operation. 

In the days to come, Multifit will continue to devote itself to the development of photovoltaic technology, continue to invest funds for develop our production, and contribute to carbon emission reduction and carbon neutrality.


Enjoying and Benefiting from the Sunshine ------Multifit Co., Ltd.
Last:CCTV news broadcast to photovoltaic power generation to take reassurance
Next:Multifit Successfully Held the Spring Outdoor Live Broadcast Event
Copyright 2018 multifitsolar.com All Rights Reserved 版权所有·广东众能光伏设备有限公司

服务热线

13641024477

微信服务号