• 200KW Power Inverter
    • 200KW Power Inverter

    • Product Features

      Our inverter power supply input DC voltage is 480Vdc，Output is 380Vac, has the following main features:

      (1) The main circuit adopts the United States INTEL microprocessor, Germany Siemens IGBT module, drive protection adopts Japan Mitsubishi movement, output partial adopts isolation transformer, safe and reliable

      (2) SPWM pulse width modulation technology, the output is inverter, pure sine wave of low distortion

      (3) Full-bridge circuit structure, applicable to any load

      (4) DC input uses state-of-the-art anti-filling noise suppression technology, the AC input of multiple filtering to eliminate the interference of the electricity grid, communication equipment and other common DC panel without disturbing each other

      (5) With a full range of power protection solutions and perfect self-detection and protection. DC input voltage is too low alarm, overload alarm, overheating alarm and short-circuit, the power will turn off the inverter output, troubleshooting, manually reset the power to work properly; Input under-voltage protection fault is cleared after the output will automatically resume

      (6) Compact circuit structure, high efficiency, strong function

      (7) Group-screen installation, elegant appearance


      Technical Data


      Model

      VMI-D200KW

      DC Input

      Input rated voltage

      480VDC

      Input rated current

      463A

      Input DC voltage allowing range

      400~620VDC

      AC Input

      Allow input voltage range

      380VAC±15%

      Input rated current

      303.9A

      Bypass transfer time

      ≤100

      AC Output

      Rated capacity

      200KW

      Output rated voltage and frequency

      380VAC,60Hz

      Output rated current

      303.9A

      Output voltage accuracy

      380VAC±1%

      Output frequency accuracy

      60Hz±0.05%

      Wave

      Pure sine wave

      (Isolation transformer)

      THD.

      ≤3% ( Linear load)

      Power factor (PF)

      0.8

      Overload capacity

      110%,10 minutes,

      200%,10 second

      Crest factor (CF)

      3:1

      Inverter efficiency

      ＞90%

      Working Environment

      Dielectric strength

      1500VAC,1minute

      Noise (1m)

      ≤55dB

      Ambient temperature

      -10℃~+50℃

      Humidity

      0~90%, No condensation

      Altitude

      ＜2000m Higher than 2000m

      rated power should be reduced

      Production function

      Input reverse protection, input under-voltage protection, output overload protection, output short circuit protection, thermal protection


    • 上一篇：Hybrid Inverter With MPPT Controller-Pro
      下一篇：Non Contact Face Recognition Smart System